Alternate Text

TECHNICAL DATA SHEET

Products Name

PVC/uPVC Profile Protective Film

Base

PE/PET

Type of Adhesive

Water based glue/Solvent-based acrylic adhesive

Color

White,Clear/Transparent,Black,Black&White,Green,Blue,Gray,Metallized film,Blue Silver,Red Silver etc

Thickness(Micorn/μ)

Widely use:35mic(PET),50mic,60mic ,70mic,80mic etc

Width

Widely use:1200mm, 1250mm or Customized

Length

Widely use:200m,300m,500m etc

Printability

Up to 5 colors

Tensile Strength

Longitudinally>8N/25mm Horizontal>15N/25mm

Elongation

Longitudinally>300% Horizontal>180%

UV Resistance

Available

Application

Protective film for PVC(uPVC) Profile/PVC(uPVC) profile Protective film,various peel strength could apply for White glossy surface, PVC laminated surface



Perfect products need good protection! When Window profiles are turned into window frames or any more cases.                                                                                                                                                   

LASPEF protective Film prevent damage to surfaces, saving expensive reworking and unnecessary production losses.                                                                                                                                                         

LASPEF Protective Films not only protect the surfaces of your valuable products during handing, mechanical, transport, assembly, stroage process but also can improve your brand image by printing your logo on its surface, Mainly used for uPVC profiles and PVC Profiles. We offer films in various quality, color, printability, thickness,length,width and adhesive

buy antibiotics online

how to take amoxicillin williamgonzalez.me buy amoxicillin liquid

buy accutane uk

buy accutane pills teampaula.azurewebsites.net buy accutane europe

pills for abortion

abortion pill philippines

buy abortion pill

medical abortion website-knowledge.com purchase abortion pill online
• Surfaces to be protected should be dry, free from dust, oil, solvents or other chemicals. • The best results are obtained with temperature of surface and surroundings at +15°C to 40°C. • Use laminating machines with rubber coated press rollers. • Try to eliminate or minimise film elongation, and the formation of air bubbles and folds during lamination. • Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C). • The film is not suitable for extreme thermoforming.

back
Alternate Text

Qingdao Laishun Plastics Co., Ltd

Address:Zhonghuabu Industrial Park, Jihongtan Street, Chengyang District, Qingdao City, Shandong Province, China 266111

E-mail:info@laspef.com

Tel:+86-053266851689 Ext: 801 or 802

Mob:+8615588625625

Alternate Text

Copyright © 2017 青岛来顺塑胶有限公司 All Rights Reserved

鲁ICP备13031932号    Design By | dongbaqu