Alternate Text

TECHNICAL DATA SHEET

Products Name

Protective Film For Wheel

Base

PE

Type of Adhesive

Water based glue/Solvent-based acrylic adhesive

Color

White,Clear/Transparent,Black&White,Blue,Gray,Yellow ,Green,Red,Orange etc

Thickness(Micorn/μ)

Widely use:50mic-80mic

Width

Widely use:100mm-1800mm

Length

Widely use:200m,500m,1000m etc

Printability

Up to 5 colors

Tensile Strength

Longitudinally>8N/25mm Horizontal>15N/25mm

Elongation

Longitudinally>300% Horizontal>180%

UV Resistance

Available

Application

Protective Film For Wheel/Wheel Protective Film


Perfect products need good protection!                                                     


LASPEF protective Film prevent damage to surfaces, saving expensive reworking and unnecessary production losses.                                    

LASPEF protective films not only protect the surfaces of your valuable products during handing, mechanical, transport, assembly, stroage process but also can improve your brand image by printing your logo on its surface. We offer films in various quality, color, printability, thickness,length,width and adhesive.


ldn

lav open naltrexon

buy prednisolone

prednisolone london fiorentina.info prednisolone weight gain

amoxicillin without prescription

amoxicillin online

generic albuterol vs ventolin

albuterol sulfate vs ventolin hfa blog.zycon.com albuterol ventolin
• Surfaces to be protected should be dry, free from dust, oil, solvents or other chemicals. • The best results are obtained with temperature of surface and surroundings at +15°C to 40°C. • Use laminating machines with rubber coated press rollers. • Try to eliminate or minimise film elongation, and the formation of air bubbles and folds during lamination. • Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C). • The film is not suitable for extreme thermoforming.

back
Alternate Text

Qingdao Laishun Plastics Co., Ltd

Address:Zhonghuabu Industrial Park, Jihongtan Street, Chengyang District, Qingdao City, Shandong Province, China 266111

E-mail:info@laspef.com

Tel:+86-053266851689 Ext: 801 or 802

Mob:+8615588625625

Alternate Text

Copyright © 2017 青岛来顺塑胶有限公司 All Rights Reserved

鲁ICP备13031932号    Design By | dongbaqu