Products Name

Protective Film For Mirror Backing Safety

Type of Adhesive

Water based glue

Thickness(Micorn/μ)

70mic ~ 200mic

Length

100m-1500m

Elongation

• Surfaces to be protected should be dry, free from dust, oil, solvents or other chemicals. • The best results are obtained with temperature of surface and surroundings at +15°C to 40°C. • Use laminating machines with rubber coated press rollers. • Try to eliminate or minimise film elongation, and the formation of air bubbles and folds during lamination. • Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C). • The film is not suitable for extreme thermoforming.